Furuno FS-1570 - Manual (Page 149)

10 NBDP FILE OPERATIONS
10-3
10.4 Editing Files
10.4.1 Cutting and pasting text
You can delete, move and copy text by using the Cut, Copy and Paste functions in the Edit
menu.
1: Undo
2: Cut
3: Copy
4: Paste
5: Select All
6: Search
7: Replace
8: Goto Top
9: Goto Bottom
0: Goto Line
A: Change Text
Edit
Edit menu
Cutting text
1. Place the cursor on the first character of the text to be cut.
2. Highlight the text to be cut by pressing and holding the [Shift] key while pressing the [
→ ].
If you highlight text which you do not want to cut, press the [ ← ] to adjust the highlight.
<[1]UNTITLED1>
CONGULATULATION ON YOUR CHOICE OF DP-6
INMARSAT B MOBILE EARTH STATION.
WE ARE CONFIDENT THAT YOU WILL ENJOY MANY YEARS OF
OPERATION WITH THIS FINE PIECE OF EQUIPMENT
The highlight
3. Press the function key [F2] and the [2] key or the [Delete] key. The highlighted text is cut
and the remaining text is reformatted.
If you make a mistake, you can restore the text by immediately selecting Undo from the Edit
menu.
Pasting text
To paste the cut text to a new location, do the following:
1. Place the cursor at the exact spot in the message where the cut text is to start.
2. Press the function key [F2] and the [4] key or the [Insert] key.