Furuno FS-1570 - Manual (Page 92)

5 CALLING, RECEIVING
5-30
10. After the call is sent, the following display appears.
Waiting for polling
acknowledgement.
DSC FREQ : 2177.0 KHZ
TIME TO GO: 4M59S
FROM SHIP: 123456789
ROUTINE
11. The timer counts down the time remaining to wait for acknowledgment of the call. One of
the following displays appears. (“No response! Try calling again?” appears when there
is no response from receiving station. The timer counts down to zero in this case.)
No response!
Try calling again?
DSC FREQ : 2177.0 KHZ
FROM SHIP: 123456789
ROUTINE
Polling acknowledge
call received.
FROM SHIP : 123456789
ROUTINE
NO INFORMATION
STOP ALARM CALL AGAIN
Polling acknowledge
call received
No response
12. Do one of the following depending on the message shown in step 11.
Polling acknowledge call received
The audio alarm sounds; press the [CANCEL] key to silence the alarm. The display
changes as below. You can confirm if called party is within communicating range.
ECC: OK
POLLING ACKNOWLEDGE
FROM SHIP: 123456789
ROUTINE
NO INFORMATION
* Received message *
GO TO ALL VIEW
MAR-23-2002-23:59
No response! Try calling again?
Re-send call: Push the [ENTER] knob followed by the [CALL] key.
Cancel call: Press the [CANCEL] key to return to the DSC standby screen.