Setting oven controls – FRIGIDAIRE 318205303 User Manual

Page 14

Advertising
background image

14

setting oven controls

note

The lower oven of model B is not equipped with a

convection fan & element. All the associated convection

cooking features will not be available in this oven.

note

Pressing cancel will stop the feature at any time.

note

The Bake, Broil and Convection elements will cycle for a

better heat distribution.

setting convection roast

This mode is best for cooking tender cuts of beef, lamb, park

and poultry. Use this mode when cooking speed is desired.

The Convection Roasting gently browns the exterior and

seals in the juices. Convection roasting uses the hidden

bake element, the hidden convection element, the broil

element and a fan to circulate the oven’s heat evenly and

continuously within the oven. The oven can be programmed

for Convection Roasting at any temperature between 170°F

to 550°F with a default temperature of 350°F.

Convection Roasting Tips:
• Use a broiler pan and grid, and a roasting rack (available

by mail order). The broiler pan will catch grease spills

and the grid will help prevent spatters. The roasting rack

will hold the meat.

• Place an oven rack on rack position 1 (offset rack).

• No preheat is needed in convection roast.

• Make sure the roasting rack is securely seated on the

grid in the broiler pan. The roasting rack fits on the grid

allowing the heated air to circulate under the food for even

cooking and helps to increase browning on the underside

(available by mail order only).

• There is no need to reduce the convection temperature or

to use the Convection Convert feature with this cooking

mode.

do not use the broiler pan without the grid or cover

the grid with aluminum foil (available by mail order).

• Always pull the rack out to the stop position before

removing food.

• Position food (fat side up) on the roasting rack.

To set a Convection Roast Temperature of 375°F:
1. Arrange oven racks and place food in the oven.

2. Press convect; “350” will be displayed; “convect”

and “BAKE” will flash.

3. Press convect again; “350” will be displayed;

“convect” and “roast” will flash.

4. Enter the desired roasting temperature using the number

pads 3 7 5.

5. Press start; The actual oven temperature will be

displayed, “convect”, “roast” and the fan icon will

be displayed. The Bake, Broil and Convection elements

will also cycle for a better heat distribution.

setting convection convert

The Convection Convert pad is used to automatically convert

a standard baking recipe for convection baking. When

set properly, this feature is designed to display the actual

converted (reduced) temperature in the display. Convection

Convert may ONLY be used with a Convection Bake cooking

mode. It can be used with the features Delay Start and

Bake Time (see their sections for directions). If convection

conversion is used with the Bake Time and Delay Start

features, “cF” (check food) will be displayed when 75% of

the bake time complete. At this time the oven control will

sound 3 long beeps at regular intervals until baking had

finished. When the bake time has completely finished the

control will display

end

and beep at regular interval until

the cancel pad is pressed.

note

To use this feature with the BAKE TIME option, the BAKE

time pad must be pressed before the convection

convert pad.

note

When using a Bake Time under 20 minutes, the Convection

Convert will not beep and display the “cF” message.

To set the oven for Convection Bake with a standard

baking recipe temperature of 400°F:
1. Arrange interior oven racks.
2. Press convect. “convect” and “BAKE” will flash

and “350” will appear in the display.

3. Press 4 0 0. “convect” and “BAKE” will keep flashing

and “400°” will appear in the display.

4. Press convection convert. As soon as the

convection convert pad is pressed, the oven will start

heating. The temperature displayed will be 25°F lower

than what it used to be. The actual oven temperature

and the fan icon will be displayed. A beep will sound

once the oven temperature reaches 375°F and the

display will show “375°”, convect, BAKE” and

the fan icon.

5. Place food in the oven.

Advertising