Farallon Communications NetLINE - Manual (Page 8)

8 Chapter 2
I NSTALLING THE HARDWARE
Begin installation by connecting the card. Then inser t the
card in the computer’s PC card slot.
1. Hold the PC card and connector so that the arrow is
facing up.
2. Inser t the flat end of the connector into the end of the
PC card until you hear a small click.
CAUTION: Use care when detaching the connector from
the PC Card. Pulling the connector from the
card without squeezing the sides may cause
severe damage to the card and connector
and may void your warranty. Do not pull the
PC card out of the PC card slot by pulling on
the connector cable.
TO
P
PRESS T
O
RELEASE
TO
P
PRESS T
O
RELEASE