Frymaster 8196203 - Manual (Page 61)

8-12
8.4 Electronics and Wiring Components
8.4.1 Component Boxes
ITEM PART # COMPONENT
1 106-5846 Box Assembly, Component
2 210-9002 Bracket, Component Box Strain Relief
3 230-1057 Bracket, Circuit Breaker
4 806-9495SP Terminal Block and Wire Assembly
5 807-0012 Relay, Filter 18 Amp ⅓ HP 24V Coil
6 826-1337 Terminal, ¼-inch Push-on (Pkg. of 5)
7 810-0045 Bushing, .875 Dia. Hole 11/16”
8 807-1947 Plug, .875
9 810-2446 Plug, .50 Heyco Double “D”
10 807-0855 Transformer, 100-120V/12V 20VA
11 807-0800 Transformer, 100-120V/24V 50VA
* 807-3892 Transformer, 440/480 12/24V (Used in non-filter fryers)
12 809-0349 Spacer, 4mm X 6mm Aluminum
13 106-6811 Interface Board
(on SMT boards the Relays are not replaceable)
807-3932 Relay, Heat/Latch 12VDC SPDT 12 Amp Sealed (on SMT boards
the Relays are not replaceable)
* 807-4330 Sound Device Adaptor Harness
* 806-7179SP Sound Device
(use 810-3141 for SMT Sound Device)
14 106-5848 Handle Assembly, Oil Flush FV
15 807-0069 Circuit Breaker, 10 Amp
16 210-9118 Guard, Finger
17 810-2445 Plug, Button .625 Heyco Double “D”
* Not illustrated.
Continued on the following page.
NOTE 1: The transformer on the left side of the
component box (Item 11) and the relay (Item 5) are
present only in the left component box.
NOTE 2: See Page 8-19 for Component Box 15-pin
Wiring Harness.