120 syst:pass:cen:stat, 121 syst:pass:grou:meas <boolean, 122 syst:pass:grou:prob <boolean – Fluke 1595A User Manual
Page 109: 123 syst:pass:grou:res <boolean, 124 syst:pass:grou:time <boolean, 125 syst:pass:new <current password>,<new password, 126 syst:pon:min, 127 syst:time <hour>,<minute>,<second, 128 syst:time:dayl off|nam|eur
99
Remote Operation
Interface Commands
8.7.3.120 SYST:PASS:CEN:STAT?
Returns the password-access state. The response is 0 if access is disabled and 1 if access is enabled.
8.7.3.121 SYST:PASS:GROU:MEAS <boolean>
Query form: SYST:PASS:GROU:MEAS?
Password protection: unconditional
Alternate parameter: DEF
Sets the password Measure Protection setting (see Section 5.7.7.1, PASSWORD (F4), on page 54). When
Measure Protection is on, settings related to measurement, and their associated commands, are protected.
8.7.3.122 SYST:PASS:GROU:PROB <boolean>
Query form: SYST:PASS:GROU:PROB?
Password protection: unconditional
Alternate parameter: DEF
Sets the password Probe Protection setting (see Section 5.7.7.1, PASSWORD (F4), on page 54). When
Probe Protection is on, settings related to probe definition, and their associated commands, are protected.
8.7.3.123 SYST:PASS:GROU:RES <boolean>
Query form: SYST:PASS:GROU:RES?
Password protection: unconditional
Alternate parameter: DEF
Sets the password Resistor Protection setting (see Section 5.7.7.1, PASSWORD (F4), on page 54). When
Resistor Protection is on, settings related to resistor definition, and their associated commands, are protected.
8.7.3.124 SYST:PASS:GROU:TIME <boolean>
Query form: SYST:PASS:GROU:TIME?
Password protection: unconditional
Alternate parameter: DEF
Sets the password Time/Date Protection setting (see Section 5.7.7.1, PASSWORD (F4), on page 54). When
Time/Date Protection is on, setting the time and date is protected.
8.7.3.125 SYST:PASS:NEW <current password>,<new password>
Example command: SYST:PASS:NEW 1234,9999
Changes the password. If <current password> is incorrect, error -221,“Settings conflict” is generated in the
error queue.
8.7.3.126 SYST:PON:MIN?
Returns the time in minutes since power on.
8.7.3.127 SYST:TIME <hour>,<minute>,<second>
Query form: SYST:TIME?
Example query response: 23,59,59
Password protection: Time/Date Protection
Sets the Time of the system clock.
8.7.3.128 SYST:TIME:DAYL OFF|NAM|EUR
Example command: SYST:TIME:DAYL NAM