Fluke 1595A - Manual (Page 48)

1594A/1595A Super-Thermometer
Main Menu
38
If the \159x\probe\ folder and .prb file have not been created previously, they will be created automatically
when the file is written. If the .prb file already exists, a newly written probe definition will be appended
into the file. However, if the .prb file already exists and all files are written to memory, the .prb file will be
overwritten.
5.7.2.5.3 MOVE UP (F3)
MAIN MENU | PROBE MENU | MANAGE PROBES |
The Move Up function key changes the order of the probe definitions in the Probe Library by moving the
selected definition up one position until it reaches the top of the list.
5.7.2.5.4 MOVE DOWN (F4)
MAIN MENU | PROBE MENU | MANAGE PROBES |
The Move Down function key changes the order of the probe definitions in the Probe Library by moving the
selected definition down one position until it reaches the bottom of the list (before ALL PROBES).
5.7.2.5.5 DELETE PROBE (F5)
MAIN MENU | PROBE MENU | MANAGE PROBES |
The Delete Probe function key allows the user to delete probe definitions from the Probe Library. If the Probe
Library capacity of 100 definitions has been reached, a probe definition has to be deleted before adding an-
other definition.
A single highlighted probe definition can be highlighted and then deleted or all probe definitions can be delet-
ed if ALL PROBES is selected. A message prompts the user to confirm the delete action before it takes place.
5.7.3 MEASURE MENU (F3)
MAIN MENU |
Figure 12 Measure Menu Screen
The Measure Menu contains the function keys needed for setting up channel scanning, measurement timing,
digital filter settings, controlling measurement recording, and performing zero-power measurements.