Fluke 1595A - Manual (Page 60)

1594A/1595A Super-Thermometer
Main Menu
50
TRACE - controls whether a measurement point is plotted with a line that connects to the previous point or as
a separate dot. The options are LINE and DOT. The default value is DOT.
Important: When Time Span is large, multiple points may be combined and drawn as a vertical line to
conserve memory.
5.7.4.5 TEMPERATURE UNIT (F5)
MAIN MENU | DISPLAY MENU |
The Temperature Unit screen allows the user to select the unit for displayed temperature measurements. The
options are °C, K, and °F. °F will not be available if SI Unit Lock is set to ON in the Calibration Parameters
screen of the Calibration menu (see Section 5.7.7.2, CALIBRATION (F5), on page 55). The default value is
°C.
5.7.5 SYSTEM MENU (F5)
MAIN MENU |
Figure 15 System Menu Screen
The System Menu contains general system settings such as time and date, remote interface, password, and
calibration.
The System Menu screen displays the following product information: Manufacturer, Model, Serial Number,
Firmware Version, and Calibration Date.
The following are the System Menu function keys:
5.7.5.1 TIME DATE (F1)
MAIN MENU | SYSTEM MENU |
The Time and Date function key allows the user to enter the system Time and Date using the following fields:
TIME - time of the system clock. It is always in 24-hour format.
DATE - date of the system clock. It appears in the format determined by the Date Format setting (see Section
5.7.4.1, USER SETTINGS (F1), on page 47).