Fortinet FortiGate 4000 User Manual
Page 264
264
Fortinet Inc.
Configuring PPTP
PPTP and L2TP VPN
5
Name the connection and select Next.
6
If the Public Network dialog box appears, choose the appropriate initial connection
and select Next.
7
In the VPN Server Selection dialog, enter the IP address or host name of the
FortiGate unit to connect to and select Next.
8
Select Finish.
To configure the VPN connection
1
Right-click the Connection icon that you created in the previous procedure.
2
Select Properties > Security.
3
Select Typical to configure typical settings.
4
Select Require data encryption.
5
Select Advanced to configure advanced settings.
6
Select Settings.
7
Select Challenge Handshake Authentication Protocol (CHAP).
8
Make sure that none of the other settings are selected.
9
Select the Networking tab.
10
Make sure that the following options are selected:
• TCP/IP
• QoS Packet Scheduler
11
Make sure that the following options are not selected:
• File and Printer Sharing for Microsoft Networks
• Client for Microsoft Networks
12
Select OK.
To connect to the PPTP VPN
1
Connect to your ISP.
2
Start the VPN connection that you configured in the previous procedure.
3
Enter your PPTP VPN User Name and Password.
4
Select Connect.
5
In the connect window, enter the User Name and Password that you use for your
dialup network connection.
This user name and password is not the same as your VPN user name and password.
Note: If a RADIUS server is used for authentication do not select Require data encryption.
PPTP encryption is not supported for RADIUS server authentication.