Fluke 566 - Manual (Page 13)

Infrared Thermometers
Menu Overview
5
Menu Overview
There are many settings that can be easily changed by using the menu. Figure 2 shows
the LCD and menu interface. Selecting the Menu softkey advances the menu to the next
level. Table 2 is a top-level description of the menu.
eyl01.eps
Figure 2. Menu Navigation
Table 2. Top-Level Menu Description
Level
Left
Softkey
Description
Center
Softkey
Right
Softkey
Description
1 Save Save reading to memory Menu Light
Adjust backlight
brightness
2 Mem Review/delete memories Menu
ε
Set emissivity
3 MnMx Enables Min/Max Menu Avg Enable Avg/Diff
4 °C/°F Toggle between C and F Menu Alarm Set and enable alarms
5
G
(Lock)
Lock the thermometer on Menu Laser Toggle the laser on/off
6 Setup
- Turn off/on backlight
- Change Time/Date
- Change Language
Menu - -
Each menu item and function is explained in greater detail in the following sections.
Save
To save readings:
1. Pull the trigger to take a measurement.
2. Release the trigger to stop taking the measurement.
3. Press the Save softkey to enter the Save menu.
4. Press the Yes softkey to save the reading.
The reading is assigned a memory location and a time and date stamp.