Hints and tips – Focal DUAL MANAGER User Manual
Page 17
• Hardware connection errors
Note: In the event of such error messages being displayed, double check hardware, drivers, and restart
program. In the worst case please upgrade the firmware.
“Sensitivity setting error.”
“Sensitivity reading error.”
For sensitivity.
“Volume setting error.”
“Volume reading error.”
For volume.
“Commutator setting error.”
“Commutator reading error.”
For commutator.
“Mode setting error.”
“Mode reading error.”
State of On/Off buttons.
“Delay setting error.”
“Delay reading error.”
For delay.
“Equalizer reading error.”
“Equalizer setting error.”
For equalizer.
“Config reading error.”
“Config writing error.”
For config.
“Get input selector error.”
“Set input selector error.”
For input selector.
“Get headroom error.”
“Set headroom error.”
For headroom.
“Get config file name error.”
“Set config file name error.”
For preset file name.
“Qbass reading error.”
“Qbass setting error.”
For QBass.
“Xover reading error.”
“Xover setting error.”
For crossover.
• Hardware upgrade errors
“Error of global JumpLoaderSection.”
Error on entering upgrade mode.
“Error of XXXXX flash programming.”
Flash memory upgrade error for device XXXX.
“Error of XXXX eeprom programming.”
Eprom memory upgrade error for device XXXX.
5. Hints and tips
17