Assembly – Fisher-Price SUPER TALK! 76960 User Manual
Page 19
21
20
Assembly
• Rotate the windshield forward so
that the base of the windshield
lies flat against the dash.
• Insert two #8 x
1
/
2
" screws into the
holes in the rear of the windshield
as shown
.
• Tighten the screws with a Phillips
screwdriver. Make sure there is no
gap between the windshield and
the dash. Do not over-tighten the
screws.
• Insert four #8 x 1" screws into the
holes in the front of the wind-
shield
.
• Tighten the screws with a Phillips
screwdriver. Do not over-tighten.
2
1
#8 x
1
/
2
" Screw – 2
19
Slots
• Insert the tabs on the windshield
into the slots in the vehicle body.
19
Tabs
Hood
Tabs
• Position the hood over the front
of the vehicle body as shown.
• Insert the tabs on the hood into
the slots in the vehicle body.
• Close the hood.
Slot
Slot
Windshield
2
1
1
2
#8 x 1" Screw – 4
Both Shown Actual Size
1
2