Yamaha CDX-397MK2 - Manual (Page 19)

English
17
En
Notes
● In step 4, you can check the program data for side A and side B
after pressing REPEAT. Information for each side is displayed
for 3 seconds.
1
Shows the number of programmed tracks.
2
Shows the total time of programmed tracks.
3
Shows the side of the tape.
● All tracks may not be programmed if the tape length is not
enough. To program all tracks, use a tape that is longer than the
actual playing time.
● You can check, cancel or correct program data. (For details,
refer to page 15.)
* When checking program data, note that “Pu” appears
between track numbers for side A and side B.
● Up to 40 tracks can be programmed. A pause inserted between
side A and B is counted as one track.
● CD synchronized recording function can be used if your tape
deck is compatible with this unit. If so, in step 5 and 6, press
SYNCHRO and then press
on the remote control of this
unit. Recording automatically starts. (For details, refer to page
21.)
PROG.
3 2 1
01En_02_BOD_CDX-397MK2_G.p65 1/23/07, 13:41 17