Frymaster 45 Series - Manual (Page 55)

2-7
ITEM PART # COMPONENT
1 806-0225SP Deflector (Target) Assembly (use 814-0034 for ceramic only)
2 826-1155 Ignitor Kit, Optional Piezo
807-1906 Electrode Assembly
810-1001 Trigger
3 823-0496 Manifold, Burner
4 Orifice
810-0407 Manufactured Gas, 2.15mm (0-1999 Ft)
Natural Gas
826-1357 1.45mm (0-1999 Ft) (Pkg of 10)
826-1386 1.40mm (2000-3999 Ft) (Pkg of 10)
810-0361 1.36mm (4000-5999 Ft)
810-0131 1.30mm (6000-7999 Ft)
812-1301 1.27mm (8000-8999 Ft)
810-0343 1.25mm (9000-10,000 Ft)
Propane/Butane Gas
826-1387 0.86mm (0-1999 Ft) (Pkg of 10)
810-0952 0.82mm (2000-3999 Ft)
810-0339 0.81mm (4000-5999 Ft)
812-0914 0.78mm (6000-7999 Ft)
812-1302 0.76mm (8000-8999 Ft)
812-0444 0.74mm (9000-10,000 Ft)
5 Pilot Assembly
810-1830 Natural Gas, w/Thermopile (non-CE w/twin-leads)
806-8688SP Natural Gas, w/Thermocouple (CE w/co-axial lead)
810-0426 Natural Gas, w/o Thermopile or Thermocouple
810-0616 Propane or Butane Gas, w/Thermopile (non-CE w/co-axial lead)
810-1773 Propane or Butane Gas, w/Thermopile (non-CE w/twin leads)
806-8689SP Propane or Butane Gas, w/Thermocouple (CE)
810-0427 Propane or Butane Gas, w/o Thermopile or Thermocouple)
810-0683 Manufactured Gas, w/Thermocouple (CE and non-CE)
6 823-0574 Shield Assembly, Burner Heat
7 Thermopile/Thermocouple
810-1873 Thermopile w/push-on terminals (used in non-CE Pilot Assemblies)
826-1527 Kit, Thermocouple with adapter (used in CE Pilot Assemblies)
812-1284 Thermocouple w/threaded terminal (component of 826-1527)
8 Tube, Pilot Gas
810-0705 For use with all burner assemblies except Hong Kong export units
812-0278 For use with Hong Kong export units only
9 810-0691 Tube, Vent
10 Valve, Gas (Non-CE) (see Note 1 below)
* 810-0975 Knob, Gas Valve
807-3294 Natural Gas (for 240V, use 807-0025)
807-3295 Propane/Butane Gas (for 240V, use 807-0759)
807-3354 Manufactured Gas (other than Hong Kong export units)
810-0353 Manufactured Gas (Hong Kong export units only)
11 Valve, Gas (CE)
806-6710SP Natural Gas (see Note 2 below)
806-6711SP Propane Gas (see Note 2 below)
* Not illustrated.
NOTES: 1. A gas valve capacitor (P/N 806-4781) is required on gas valves used on units with
Thermostat Controllers. 2. An adapter kit (P/N 812-1256SP) is required to connect the high-limit
thermostat to Item 11. See Page 2-34 for details.