FRIGIDAIRE 100BTU-25 - Manual (Page 6)

6
Air Conditioner Features
(continued)
TO ADJUST FAN SPEEDS: YOU WILL SEE :
DO THIS:
PRESS TO
SELECT:
FASTER
SLOWER
TO USE AUTO TEMP FEATURE: YOU WILL SEE:
Note: Fan speed starts at High Speed and adjusts to a slower speed as the room temperature dictates. For example if the room doesn’t
get too warm, it will stay at the slowest speed. If the room temperature rises quickly, such as a door being opened, it will automatically go
to the highest speed. The fan speeds will re-adjust back to the slowest speed as the room returns to the original set temperature.
DO THIS:
PRESS AUTO
TEMP
BUTTON
LIGHT ON
TO OPERATE ON FAN ONLY: YOU WILL SEE:
Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air. (Remember to open the
vent during this function, but keep it closed during cooling for maximum cooling efficiency.) You can choose any fan speed you prefer. (Exc-
ept “Auto Temp”).
During this function, the display will show the actual room temperature, not the set temperature as in the cooling mode.
LIGHT ON
DO THIS:
PRESS
MODE BUTTON
CHOOSE
FAN ONLY
Press the Fan Faster button will increase the fan speed from Low (LO), to Medium (ME), to High (HI). The digital display will indicate
your chosen speed. Press the Fan Slower button will decrease the fan speed from High (HI), to Medium (ME), to Low (LO).The digital display will
indicate your chosen speed.After 5 seconds the display will revert back to the set temperature.
Fan Only cannot be selected when the unit is in the 'Remote Sensing' Mode.(On those units with that feature).