FRIGIDAIRE 100BTU-25 - Manual (Page 8)

8
Air Conditioner Features
(continued)
CHECK FILTER FEATURE:
Note: In this “MODE” the set temperature will increase by 2 degrees F 30 minutes after the mode is selected. The temperature will then
increase by another 2 degrees F after an additional 30 minutes. This new temperature will be maintained for 7 hours before it returns to the or-
iginally selected temperature. This ends the “Sleep” MODE and the unit will continue to operate as originally programmed. The “Sleep”
MODE program can be cancelled at any time during operation by again pressing the “Sleep” button.
DO THIS:
PRESS SLEEP
BUTTON
LIGHT ON
TO TURN UNIT OFF: YOU WILL SEE:
DO THIS:
PRESS ON/OFF
BUTTON
LIGHT ON
YOU WILL SEE :
Note: This feature is a reminder to clean the Air Filter (See Care and Cleaning) for more efficient operation and cooling. The LED (light) will
illuminate after 250 hours of operation. To reset after cleaning the filter, press the “Check Filter” button and the light will go off.
SLEEP FEATURE: YOU WILL SEE:
FAULT CODES:
If the display reads"AS", a sensor
has failed.Contact your Authorized
Frigidaire Service Center.
If the display reads"ES", a sensor
has failed.Contact your Authorized
Frigidaire Service Center.