User/password 72 – FOCUS Enhancements FS-2 User Manual
Page 92
FS-2/2E Studio DTE Disk Recorder User Guide
72
2.5.12.20.2 USER/PASSWORD
This screen allows you to set a username and
password for the FS-2/2E. If you are unsure what
username and password to use, contact your system
administrator.
• Username may have up to 4 characters.
• Password may have up to 6 characters.
To modify the username and password, use the
following steps:
1.
Select the item to modify and then press the right
arrow key to select the field.
2.
Use to increase the value (HINT: press the
SHIFT
key on the FS-2/2E front panel plus to
decrease a value).
3.
Values loop back to zero once the maximum
value has been entered.
4.
To modify the next item, press the
NEXT
key on
the FS-2/2E front panel. It is only possible to have
one username and password per unit. The
maximum number of characters for each is seven.
USER:
PASWD:
EXIT
SAVE
NEXT
fs2
focus