FOCUS Enhancements FS-2 - Manual (Page 87)

FS-2/2E Studio DTE Disk Recorder User Guide
67
FS-2/2E Functions
• CUSTOM - The FS-2/2E looks on disk drive volume 1 for any
clip named SPLASH.dv and always displays the first frame of
that clip. You can name any RawDV clip Splash.dv and the
first frame from that clip appears as the default output in
STOP mode.
2.5.12.16 Audio Correct
This sub-menu allows you to change the AUDIO CORRECTION
setting on the FS-2/2E.
• The highlighted state is saved after exiting.
• Press
EXIT to return to the menu screen.
The AUDIO CORRECTION selection is an advanced feature of
the FS-2/2E. You should use the factory default settings for most
operations (Factory default is MEDIUM).
Audio Correction mode allows you to alter the performance of the
audio error corrector while recording. It is useful when recording
to the FS-2/2E from tapes containing dropouts. Error correction
only effects AVI 2, Canopus AVI, Matrox AVI, QuickTime, AVID
OMF, Pinnacle, 24p QuickTime, and 24p AVI Type 2. It does not
effect RawDV or AVI 1. The selections are:
• OFF - No audio correction.
• MEDIUM - (default) “Normal” clean tapes played back on a
camcorder or other VTR with clean heads. When error
correction occurs, the audio can be muted for brief periods of
time.
• HIGH - For cases where there are visible picture disturbances
and likely long audio dropouts (1/2 sec and up).
OFF
MEDIUM
HIGH
EXIT