Kenwood SK620 - Manual (Page 6)

● Your kettle is fitted with a scale filter
to hold back limescale particles.
● If you find drops of water under your
kettle, don’t worry - it is just
condensation.
boil-dry protection
● If you switch on with too little water,
your kettle will cut out automatically.
Switch off and let it cool down
before re-filling.
When it has cooled down, the switch
will reset itself.
care and cleaning
Before cleaning, unplug your kettle
and let it cool down.
the outside and powerbase
● Wipe with a damp cloth, then dry.
Do not use abrasives - they will
scratch the metal and plastic
surfaces.
the inside
● Wipe with bicarbonate of soda on a
damp cloth. Rinse thoroughly.
● Even though your kettle comes with
a scale filter, you still need to clean
the inside (and the filter) regularly.
the scale filter
1 Open the lid.
2 Slide the filter out
ᕡ.
3 either rinse under the tap or use a
soft brush.
or when descaling your kettle, drop
the filter in too. Rinse thoroughly.
4 Slide the filter back in to refit.
descaling
● Regular descaling of the flat element
will improve the performance of your
kettle. If the kettle is not descaled
regularly the build up of limescale
may result in the following:
● problems may be experienced
with the kettle switching on and
off during use or switching off
before boiling.
● the kettle may take longer to boil.
● the flat element may be damaged.
Please note: not descaling your kettle
may invalidate your guarantee.
● When limescale starts to build up on
the heating element, buy a suitable
descaler and descale your kettle.
After descaling, boil with fresh water
several times and discard. Clean any
descaler off the kettle - it can
damage the parts.
● Some regions of the country have
chalky water. This makes boiled
water look cloudy and leaves a
deposit on the side of the kettle. This
is normal but can be removed with
regular cleaning.
● Alternatively, to reduce limescale
build up, use filtered water to fill your
kettle.
● A range of Kenwood jug water filters
are available.
service and customer
care
● If the cord is damaged it must, for
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
If you need help with:
● using your kettle
● servicing or repairs
Contact the shop where you bought
your kettle.
3