Controls & settings, System-monitoring alarms – FRIGIDAIRE 241540101 User Manual

Page 14

Advertising
background image

14

Controls & Settings

SYSTEM-MONITORING ALARMS

The electronic control system continuously
monitors your refrigerator/freezer for temperature
consistency, doors left ajar, and power failures.
Variances from normal operating conditions are
communicated by audible tones and a set of four
status indicator lights.

Responding to Alarms (Audible Tones & Indicator Lights)

Your refrigerator’s control system can convey the following information through
audible tones and the alarm indicator lights.

Alarm

Name

Indicator

Light

Audible

Tones

Condition

How To Respond

On

(light is

off)

Alarm system is not active
while Freezer and Fresh
Food compartments are
cooling toward the current
temperature settings.

If Freezer and Fresh Food
compartments do not match your
temperature settings in three hours,
expect the control system to signal
other conditions. If cooling does not
stabilize toward your current settings,
call 1-877-435-3267 for assistance.

Steady

Green

Alarm system is active.

No response required.

Door

Ajar

Flashing

Green

9

Freezer or Fresh Food
door has been open for
over five minutes.

Close door to disable and reset alarm.

High

Temp

Flashing

Amber

9

Freezer or Fresh Food
compartment has been too
warm (45° F or higher) for
over an hour.

Press Alarm Reset button to turn off
alarm. If temperatures do not improve,
call 1-877-435-3267 for assistance.

Power

Failure

Flashing

Amber

A power outage was
detected.

Press Alarm Reset button to turn off
alarm and again to reset. Check if the
power failure lasted long enough to
affect stored food temperatures.

NO

NO

NO

NO

NOTE

TE

TE

TE

TE

Each time you make settings on the control panel, a
single audible tone acknowledges your input.

Alarm Reset Button

Indicator Lights

Advertising