Fuji Bikes Carbon Team Pro (US) - Manual (Page 6)

Clean and lightly grease threads prior to installation. Recommended torque for the rear
derailleur is 70 in-lbf (8Nm). Do not exceed maximum torque of 87 in-lbf (10 Nm).
BRAKES:
Install the rear brake caliper on the frame. Recommended torque for road brake calipers
is 70 in-lbf (8 Nm). Do not exceed maximum torque of 87 in-lbf (10 Nm).
WATER BOTTLE CAGE:
Recommended torque for the water bottle cage bolt is 35 in-lbf (3.9 Nm). Do not exceed
maximum torque of 40 in-lbf (4.5 Nm).
Warning: You should always take extreme precaution to not damage carbon fiber or
composite materials, including frame or other carbon/composite component. Damage
may result in loss of structural integrity. This damage may not be visible. Before each
ride and after every crash, you should carefully inspect your bicycle for any dents,
gouges, fraying, scratches through the paint, chipping, bending, or any other signs of
damage. It is recommended by Fuji Bikes that you take your bike to a Fuji dealer for a
complete inspection if it shows any of these signs.
WARRANTY:
For complete warranty provisions, please see the owner’s manual or visit your local authorized
Fuji dealer. www.fujibikes.com.