Frymaster H52 Series - Manual (Page 15)

3–2
3.3 Introduction To The M-100B™ Cooking Computer
The M-100B cooking computer, illustrated below, automatically maintains fryer temperature to cook
products according to preprogrammed cooking specifications. The computer also acts as a cooking
process timer, displaying the remaining cooking time for each product and alerting the operator by
sound and display message to shake or pull the product at the correct time. It also signals quality
control (hold-time) limits. The computer automatically adjusts cooking times to compensate for
variances in product temperature and basket load so that, for example, a full basket of cold fries will
be cooked to the same quality as half a basket of fries at room temperature.
A B C
D
H
J
L
E
N O M
K
I
F G
ITEM DESCRIPTION
A Temperature Display Switch
B Left LED Display
C Right LED Display
D Cook Switch #1, Left
E Cook Switch #2, Left
F Cook Switch #1, Right
G Cook Switch #2, Right
H Recovery/Use Time Recall Switch, Left
I Recovery/Use Time Recall Switch, Right
J Light - Left Heating Mode Indicator
K Light - Right Heating Mode Indicator
L Switch - Left ON/OFF
M Switch - Right ON/OFF
N Switch - Left Product Selection
O Switch - Right Product Selection
To quickly determine the software version number and the current configuration of an M-100B
computer, with the computer turned OFF (OFF in both displays) press the temperature check
switch. The displays will automatically cycle through the version number, power configuration (gas
or electric), EPRA configuration (On or Off), and frypot configuration (full or split).