Frymaster H52 Series - Manual (Page 47)

6-8
PUMP DOES
NOT RUN.
Had the
pump been running
for a while and then
stopped?
Yes
Pull filter assembly from
cabinet and allow motor to
cool for 30 minutes. Press
thermal overload reset
button, then resume filtering.
Is pump
running OK?
Problem resolved. Yes No
No
If pump did not start at all, probable
causes are a failed or misaligned
pump microswitch, a failed pump relay,
or a failed pump motor. Call FASC.
If motor started, then almost immediately
stopped, probable cause is pump clogged/
jammed with debris. Call FASC.