Gefen EXT-DPKVM-422 - Manual (Page 15)

ADDITIONAL SWITCHING OPTIONS
The underside of the 2x2 DPKVM Switch features a DIP switch bank that is used to
confi gure additional features. DIP switch 3 is used to control the function of Contact
Closure-type remote controls on the rear panel.
1 2 3 4
This port can be confi gured to accept
additional switching devices
ON
OFF
DIP Switch 3
Enabling DIP switch 3 will allow the user to utilize a contact closure type
of remote control such as Gefen product # EXT-RMT-2x2 to initiate input
switching. By default, this switch is in the OFF position and will rely on the
standard switching methods outlined previously in this manual.
DIP Switch 4
Not Used
Note: After resetting DIP switches, the unit must be power-cycled.
1 IR Channel
2 IR Channel
3 Remote/Closure
4 Not Used
12