Gefen EXT-DPKVM-422 - Manual (Page 9)

CONNECTING THE 2X2 DPKVM SWITCH
Connecting Source Devices to the 2x2 DPKVM Switch
1. Connect up to two DisplayPort source devices to the DisplayPort inputs on
the 2x2 DPKVM Switch using the included DisplayPort cables.
2. Connect up to two audio sources to the 3.5mm analog audio mini-jack inputs
using the included audio cables.
3. Connect up to two USB source devices to the USB Type B inputs using the
included USB Type A to B cables.
4. Connect a DisplayPort supported display to the DisplayPort output on the
2x2 DPKVM Switch.
5. Connect an audio device to the 3.5mm analog audio mini-jack output using
a user supplied 3.5mm analog audio cable.
6. Connect up to two USB devices to the USB Type A inputs.
7. Connect the included 5V locking power supply to the power receptacle on
the 2x2 DPKVM Switch
8. Connect the opposite end of the power supply to an open wall socket power
source.
Wiring Diagram for the 2x2 DPKVM Switch
EXT-DPKVM-422
Computer
Computer
DisplayPort Display
w/USB & Audio
DisplayPort Display
w/USB & Audio
DISPLAYPORT CABLE
MINI STEREO AUDIO CABLE
USB CABLE
DisplayPort KVM Switcher Displ
6
ATTENTION: This product should always be connected to a
grounded electrical socket.