GE 21025/26 - Manual (Page 44)

44
S
ETTING THE
S
ECURITY
C
ODE FOR
R
EMOTE
A
CCESS
The product provides you with the ability to access the answering system
from a tone dialing telephone in another location. The security code is
required for remote access, and it prevents unauthorized access to your
answering system. The default security code is
1 2 3, and you may only
change the security code at the handset.
1. Press the exit/answerer button on the handset.
2. Press the *tone button to display SECURITY CODE 1 2 3.
3. Use the touch-tone pad on the handset to enter your new 3-digit security
code. For example, press the 6, 2, and 8 number key for security code 628.
NOTE: If you want to re-enter the security code, enter the numbers again. The
new numbers replace the old numbers.
To keep the current security code, exit the remote access mode, and return
to standby mode, press the exit/answerer button.
4. Press the *tone button, and you will hear a confirmation tone. The new
security code shows in the display.
SECURITY CODE
628
SECURITY CODE
1 2 3
SECURITY CODE
628