Global Machinery Company LTP25SS User Manual
Page 4
4
Specifications
Engine:
25.4cc, 2 stroke
Max. speed:
9000min
-1
Cutting diameter (swathe): 380mm
Line thickness:
2mm
Spool type:
Bump feed, twin line
Fuel tank capacity:
700ml
Fuel type:
Unleaded petrol
Fuel mixture:
Unleaded petrol:
2-Stroke oil (40:1)
Equivalent spark plugs:
NGK BPMR7A
CHAMPION CJ7Y
Net Weight:
4.0kg
Noise label rating 85dBA (taken at 7.5 meters) you must wear ear
protection at all times.
Safety instructions
WARNING.
Read and understand all instructions.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury. The term
“power tool” in all of the warnings below refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Save these instructions
Work area
•
Keep work area clean and well lit.
Cluttered and dark
areas invite accidents.
•
Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases, or dust.
Power tools create sparks which
may ignite the dust or fumes.
•
Keep children and bystanders away while operating
a power tool.
Distractions can cause you to lose control.
Personal safety
•
Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or under
the influence of drugs, alcohol, or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
•
Use safety equipment.
Always wear eye protection.
Safety equipment such as a dust mask, non-skid
safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
•
Remove any adjusting key or wrench before turning
the tool on.
A wrench or a key that is left attached to a
rotating part of the power tool may result in personal injury.
•
Do not overreach.
Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
•
Dress properly.
Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be caught
in moving parts.
•
If devices are provided for the connection of dust
extraction and collection facilities ensure that these
are connected and properly used.
Use of these
devices can reduce dust-related hazards.
Power tool use and care
•
Do not force the power tool. Use the correct power
tool for your application.
The correct power tool will
do the job better and safer at the rate for which it
was designed.
•
Do not use the power tool if the switch does not turn
it on and off.
Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
•
Turn tool off completely before making any adjustments,
changing accessories, or storing power tools.
Such preventive safety measures reduce the risk
of starting the power tool accidentally.