Goldstar DH50EL DH65E - Manual (Page 5)

5
3-prong
grounding
plug
Ground
prong
Power
supply
cord
3-prong
grounding
type wall
receptacle
1. Control panel
2. Case front
3. Power cord
4. Top cover
5. Air filter
6. Water bucket
7. Cabinet
2
1
3
4
5
6
7
Operating Instructions
Features
This section contains captioned illustrations of your appliance. Use the drawings to become familiar with
all parts and features and what they look like.
Electrical requirements
OBSERVE ALL LOCAL CODES AND ORDINANCES.
DO NOT, UNDER ANY CIRCUMSTANCES, REMOVE
THE POWER SUPPLY CORD GROUND PRONG.
Electrical ground is required on this appliance.
A 115-volt 60 Hz, AC only, 15A fused and properly
grounded electrical supply is required. A time delay
fuse or time delay circuit breaker is recommended.
Use a dedicated circuit, serving only this appliance.
Do not use an extension cord.
Recommended grounding method
For your personal safety, this appliance must be grounded. This appliance has a power supply cord
with a 3-prong grounding plug. To minimize possible shock hazard, the cord must be plugged into a
mating grounding type wall receptacle, grounded in accordance with the National Electrical Code
(ANSI/NFPA 70) latest edition and all local codes and ordinances. If a mating wall receptacle is not
available, it is the personal responsibility and obligation of the customer to have a properly grounded
3-prong wall receptacle installed by a qualified electrician.