Grizzly G0459 - Manual (Page 14)

-12-
G0459 12" Drum Sander
Placing Sander
To place the sander in a permanent location:
1. With an assistant's help, lift the sander out of
the box and move it to your predetermined
location.
The Model G0459 is a
heavy machine (139 lbs.).
DO NOT over-exert your-
self while unpacking or
moving your machine—
get assistance.
Mounting
Components and Hardware Needed: Qty
Lag Bolts 5 ⁄
16
-18 x 40 (Not Included) ..................4
Flat Washers 5 ⁄
16
(Not Included) ........................4
To mount the drum sander to a bench top:
1. Place the sander on a bench top capable
of holding approximately 140 lbs. plus the
weight of the workpiece. Make sure the sur-
face is flat and stable.
2. Drill four 1 ⁄
4
" holes on the bench, using the
holes in the base as a guide.
3. Using a 1 ⁄
2
" wrench, bolt the base to the
bench top with 5 ⁄
16
" lag bolts and flat washers
as shown in Figure 5.
Figure 5. Installing sander onto bench top.