Grizzly G0459 - Manual (Page 17)

G0459 12" Drum Sander
-15-
Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
Operation Safety
SECTION 4: OPERATIONS
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
Switch/Lockout
The ON/OFF switch can be locked-out to prevent
unauthorized use.
To turn the switch ON and OFF:
1. To turn the sander ON, flip the switch up.
2. To turn the sander OFF, press the switch
down.
3. To lock-out the switch, remove the yellow key
from the switch housing, as shown in Figure
8. Place the key in a safe place.
Figure 8. Locking-out.