GE 27881 - Manual (Page 12)

1
Telephone Set Up
There are twelve programmable menus available on the base: Language, Display
Contrast, Rings to Answer, Security Code, Ringer Level, Ringer Tone, Tone/Pulse, Set
Day, Set Time, Local Area Code, Link Cordless Handset, and Default Setting.
There are five programmable menus available on the handset: Language, Local Area
Code, Ringer Tone, Link Base, and Default Setting.
NoTE: To exit the menu without making changes, press the *ToNE/
EXIT button on the base or ToNE*/exit on the handset.
NoTE: You can press FLASH/PRoGRAM at any time to go to the next
menu item.
NoTE: Changing menu settings on the handset will only change
the settings on the handset, and changing menu settings on the
base will only change the settings on the base. For example, if you
change the language on the handset, it will not change language
on the base.
Language
NoTE: This setting may be made on both the base and the cordless
handset, independent of each other.
1. Press the FLASH/PROGRAM button until SET LANGUAGE 1ENG 2FRA 3ESP or 1ENG
2FRA 3ESP shows in the display. 1ENG is the default setting.
NoTE: ENG stands for ENGLISH. FRA stands for French. ESP stands
for SPANISH.
. Press 1, , or 3 on the cordless handset or base touch-tone pad to enter your
selection, or press the REVIEW or NEXT buttons on the base or the VOL/CID (- or +)
button on the cordless handset to scroll to your selection.
3. Press FLASH/PROGRAM again to store your selection.
display Contrast
NoTE: This setting may only be made with the base.
1. Press the FLASH/PROGRAM button until SET CONTRAST shows in the display. 1 is
the default setting.