GE 27881 - Manual (Page 32)

3
-Or-
1. Make sure the phone is oFF (not in talk mode).
. Press the MEM/CONFERENCE button.
3. Press the desired memory location button (0-9), or use the REVIEW or NEXT button
to scroll to the desired telephone number.
4. Press the SPEAKER/CALL BACK button. The number dials automatically.
Chain dialing from Memory
Use this feature to make calls that require a sequence of numbers, such as a
frequently used long distance card number. The following example shows how you
can store each part of the long dialing sequence and use chain dialing to make a call
through a long distance service provider:
The Number For
Memory Location
Long Distance Access Number 7
Authorization Code 8
Frequently called long distance number 9
Handset:
Make sure the phone is
oN.
1. Press MEMORY/conference and then press 7.
. When you hear the access tone, press MEMORY/conference and then press 8.
3. At the next access tone, press MEMORY/conference and then press 9.
base:
Press the SPEAKER/CALL BACK button, or lift the corded handset.
1. Press MEM/CONFERENCE and then press 7.
. When you hear the access tone, press MEM/CONFERENCE and then press 8.
3. At the next access tone, press MEM/CONFERENCE and then 9.
TIP: Wait for the access tones before pressing the MEM/
CoNFERENCE button or your call might not go through.