Grizzly G0561 - Manual (Page 22)

-20-
g0561 7" x 12" Metal-Cutting Bandsaw
Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
Operation Safety
SECTION 4: OpErATIONS
NOTICE
If you have never used this type of machine
or equipment before, WE STrONGLy rEC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
the vise can hold material up to six inches wide
and be set to cut angles from 0 to 45 degrees.
To square the blade to the vise:
1. loosen the lock nut shown in figure 23 with
a 3 ⁄
4
" wrench or socket.
2. use the scale as a guide to set your angle, or
use a machinist square to square the blade
to the vise.
3. tighten the lock nut.
vise
figure 23. squaring vise to blade.
lock nut