Web configuration – Gefen GTV-ETH-2COAX User Manual

Page 27

Advertising
background image

24

WEB CONFIGURATION

If an IP address has been set in the ADVANCE CONFIGURATION PANEL,
access to the WEB UTILITY will be enabled. To access the

Y

WEB UTILITY, open

your web browser and type the ip address into the address fi eld. The IP address
is dependant on the IP Confi guration Setting assigned on page 20. The IP
address can either be assigned by the DHCP server or a static IP address can be
manually assigned.

AUTHENTICATION

The browser should open the authentication page displayed below.

Authentication
To enter the WEB UTILITY, enter the confi guration password. The default
password is “paterna” unless modifi ed during the setup stage on page 14.

Factory Reset
The unit can be reset to factory settings from this menu. Enter the factory reset
password. The default password is “betera”.

Advertising