Basting pan – GE Monogram Gas Grill User Manual

Page 17

Advertising
background image

17

Basting
pan

The location of the burner allows the

placement of the rotisserie basting pan

(included) beneath the food to collect

juices and drippings for basting and gravy.

To flavor the contents of the basting pan, you

can add herbs, onion, garlic or spices. Hams

are especially good with the addition of

pineapple slices and brown sugar to the

basting pan.

To load the
skewer

1.

To load the skewer begin with the handle in

place and slide one of the meat holders, with

the prongs facing away from the handle,

onto the skewer.

2.

Push the skewer through the center of the

food, then slide the second meat holder with

the prongs toward the food, onto the skewer.

3.

Center the food on the skewer. Push the meat

holders firmly together. (Some models have

grooves on the skewer to indicate the burner

position. Use them to position the meat

holders.) When cooking foods such as multiple

chickens, always place the thickest portion

of the food nearer the center of the skewer.

4.

Tighten the wing nuts with pliers. It may be

necessary to wrap the food with butcher’s

string to secure any loose portions. Never

use nylon or plastic string.

5.

Once the food is secure, insert the skewer

into the motor. If needed, remove the grill

racks. Place the basting pan beneath the

food. It is normal for the skewer to flex

when larger cuts of meat are being cooked.

6.

Use the motor switch (on some models) to

turn the rotisserie motor on or off.

24

model rotisserie

To setup the
grill for
rotisserie

(24

models only)

1.

Open the lid.

2.

Remove the grill racks.

3.

Remove the front large stainless steel

radiant tray with briquettes.

4.

Remove the back small stainless steel radiant

tray with briquettes and place it into the

rotisserie cooking position by sliding it into

the rotisserie cooking slots.

5.

Place the basting pan, on the grill floor,

inside the grill compartment, against the

bottom of the stainless steel radiant tray.

6.

Assemble the rotisserie motor and skewer.

7.

Use only the small, stainless steel radiant

tray with briquettes in the rotisserie cooking

position. The large stainless steel radiant

tray with briquettes is not used during

rotisserie cooking.

7.

Use the REAR GRILL control only, for

rotisserie cooking.

Basting Pan

Advertising