Grizzly G4179 - Manual (Page 13)

Model g4179 1 ⁄
2
hp power Feeder
-11-
inventory
the following is a description of the main compo-
nents shipped with your machine. lay the compo-
nents out to inventory them.
Note: If you can't find an item on this list, check
the mounting location on the machine or examine
the packaging materials carefully. Occasionally
we pre-install certain components for shipping
purposes.
box inventory (Figures 3 & 4) Qty
a. power Feeder assembly ............................ 1
b. Extra 26/34-tooth gears (Behind Cover) .....
..............................................................1 Ea
c. Elbow Joint assembly ................................ 1
D. Base and Column assembly ...................... 1
E. Crank and leadscrew assembly ................ 1
F. Base Bolt pattern template ........................ 1
G. pointed set screws M8-1.25 x 12 .............. 3
H. hex Wrench 4mm ....................................... 1
i. handcrank handles .................................... 2
J. Flat Washer 13mm ..................................... 1
K. t-handle ..................................................... 1
L. horizontal Column assembly ..................... 1
SuFFOcatiON HazaRD!
immediately discard all plas-
tic bags and packing materi-
als to eliminate choking/suf-
focation hazards for children
and animals.
if any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Figure 3. power feeder inventory.
a
C
B
Figure 4. Base inventory.
E
d
F
g
h i
J
K
l