GE 162D3941P005 - Manual (Page 20)

Preparing to install the refrigerator.
20
Operating Instr
uctions
Installation Instr
uctions
Safety Infor
mation
Tr
oubleshooting T
ips
Customer Ser
vice
Leveling Rollers
The rollers have 2 purposes:
The rollers can be adjusted so the refrigerator is firmly positioned on the
floor and does not rock back and forth.
Rollers allow you to move the refrigerator away from the wall for cleaning.
To adjust the rollers, remove the base grille by pulling it out at the bottom.
Turn the front roller adjusting screws clockwise to raise the refrigerator,
counterclockwise to lower it. Use a 3/8
″
socket wrench, adjustable wrench
or pliers.
Turn the rear roller adjusting screws clockwise to raise the refrigerator,
counterclockwise to lower it. Use a flat blade screwdriver.
NOTE: When leveling, you can improve door closure by raising the front as much as 5/8
″
(15 mm)
more than the rear of the refrigerator.
To replace the base grille, align prongs on back of grille with clamps in cabinet
and push forward until grille snaps into place.
2
1
Read these instructions completely and carefully.
Front Roller
Adjusting Screw
Rear Roller
Adjusting Screw
Slot where prong of grille
snaps into place