GE 162D3941P005 - Manual (Page 22)

Inserting the door panels.
22
Operating Instr
uctions
Installation Instr
uctions
Safety Infor
mation
Tr
oubleshooting T
ips
Customer Ser
vice
Read these instructions completely and carefully.
Remove the Door Handle Trim
Open the freezer door and remove the single screw from the top handle cap.
Do not try to remove the cap.
Loosen the screws across the top trim of the door approximately 1/4
″
(6
mm). This allows the top handle cap to slip out from under the top trim.
Remove the 5 screws from the full-length handle. Keep all screws.
Extra replacement screws for the door trim can be found in the storage drawers.
Carefully remove the freezer door handle along with the top
handle cap.
NOTE: Be careful not to damage the bottom handle cap when removing the freezer door
handle. It is attached to the full-length handle with a screw and does not need to be
removed from the handle.
4
3
2
1