GE 49-80602 - Manual (Page 31)

S
a
fe
ty
In
st
ru
c
tio
n
s
O
p
e
ra
tin
g
In
st
ru
c
tio
n
s
S
a
fe
ty
In
st
ru
c
tio
n
s
O
p
e
ra
tin
g
In
st
ru
c
tio
n
s
C
a
re
a
n
d
C
le
a
n
in
g
T
ro
u
b
le
sh
o
o
tin
g
T
ip
s
C
o
n
su
m
e
r S
u
p
p
o
rt
31
Special features of your oven control.
GEAppliances.com
12-Hour Shutdown
With this feature, should you forget
and leave the oven on, the control will
automatically turn off the oven after
12 hours during baking functions
or after 3 hours during a broil function.
If you wish to turn OFF this feature, follow
the steps below.
Touch the upper oven BROIL HI/LO
and BAKE pads at the same time until
the display shows SF.
Touch the DELAY START pad
until no shdn (no shut-off) appears
in the display.
Touch the START pad to activate
the no shut-off and leave the control
set in this special features mode.
Fahrenheit or Celsius Temperature Selection
Your oven control is set to use the
Fahrenheit temperature selections,
but you may change this to use
the Celsius selections.
Touch the upper oven BROIL HI/LO
and BAKE pads at the same time until
the display shows SF.
Touch the COOK TIME and BROIL
HI/LO pads at the same time. The
display will show F (Fahrenheit).
Touch the COOK TIME and BROIL
HI/LO pads again at the same time.
The display will show C (Celsius).
Touch the START pad.
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps
will sound followed by one beep every
6 seconds until the CLEAR/OFF pad is
touched. This continual 6-second beep
may be cancelled.
To cancel the 6-second beep:
Touch the upper oven BROIL HI/LO
and BAKE pads at the same time until
the display shows SF.
Touch the BROIL pad. The display
shows CONTI BEEP (continuous beep).
Touch the BROIL pad again. The
display shows SINGLE BEEP. (This
cancels the one beep every 6 seconds.)
OR
Touch the KITCHEN TIMER ON/OFF
pad. The display shows CON BEEP
(continual beep). Touch the KITCHEN
TIMER ON/OFF pad again. The
display shows BEEP. (This cancels
the one beep every 6 seconds.)
Touch the START pad.
Your new touch pad control has additional features that you may choose to use. The following are the features
and how you may activate them.
The special feature modes can only be activated while the display is showing the time of day. They remain
in the control’s memory until the steps are repeated.
To enter a special feature for either oven, you must first touch the upper oven BROIL HI/LO and BAKE pads
at the same time. The lower oven BROIL HI/LO and BAKE pads will not activate special features.
When the display shows your choice, touch the START pad. The special features will remain in memory after
a power failure, except for the Sabbath feature, which will have to be reset.
(on some models)
START
BROIL
HI/LO
BAKE
+
KITCHEN
TIMER
ON/OFF
(on some models)