Piece inventory, Unpacking – Grizzly G1073/G1073Z User Manual
Page 10
-8-
G1073/G1073Z 16" Bandsaw
Piece Inventory
After all the parts have been removed from the
carton, you should have:
•
Bandsaw Unit with Blade
•
Motor
•
Stand Parts (1073)
• Cabinet Stand (1073Z)
•
Table Support Bracket
•
Miter Gauge
•
Table
•
Mounting Bracket
•
Fence
•
V-Belt
•
Pulley Guard
•
Dust Port
Hardware
Qty
Carriage Bolts
5
⁄
16
"-18 x
5
⁄
8
" 24
(does not apply for G1073Z)
Hex Bolts
1
⁄
4
"-20 x
3
⁄
4
"
2
Hex Bolts
5
⁄
16
"-18 x 1"
4
Carriage Bolts
5
⁄
16
"-18 x 1"
4
(does not apply for G1073Z)
Hex Bolts
3
⁄
8
"-16 x 1"
2
Hex Bolts
3
⁄
8
"-16 x 2"
4
Hex Nuts
1
⁄
4
"-20
2
Hex Nuts
5
⁄
16
"-18
32
(4 for G1073Z)
Hex Nuts
3
⁄
8
"-16 6
(4 for G1073Z)
Flat Washers
5
⁄
16
"
32
(4 for G1073Z)
Anti Vibration Pads
4
Flat Washers
3
⁄
8
"
12
(8 for G1073Z)
Cap Screws
1
⁄
4
"-20 x 1
1
⁄
4
"
4
Fence Rail Spacers
4
Flat Washers
1
⁄
4
"
4
In the event that any non-proprietary parts are
missing (e.g. nuts or washers), we would be glad
to replace them, or for the sake of expediency,
replacements can be obtained at your local hard-
ware store.
Unpacking
The Model G1073 Bandsaw is shipped from the
manufacturer in a carefully packed carton, and
the Model G1073Z is shipped in two cartons. If
you discover the machine is damaged after you
have signed for delivery,
please call Customer
Service immediately for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise filing a freight claim can be difficult.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
The Model G1073/G1073Z is a
heavy machine (456 lbs. ship-
ping weight). DO NOT over-
exert yourself while unpack-
ing or moving your machine –
get assistance.
If moving this machine up
or down stairs, the
machine must be disman-
tled and moved in smaller
pieces. Make sure the
stairs are capable of sup-
porting the combined
weight of the machine
parts and the people mov-
ing them.
Some metal parts may
have sharp edges on them
after they are formed.
Please examine the edges
of all metal parts before
handling them. Failure to
do so could result in
injury.