Inserting the door panels – GE 200D8074P050 User Manual

Page 21

Advertising
background image

21

Inserting the door panels.

Attach the Top Trim on the Freezer and Fresh Food Doors.

The Top Trim can be found inside the refrigerator

compartment.
With a T-20 Torxdriver, attach the Top Trim, using two

screws on each Top Trim piece, to the top of each

door. Hand tighten only. Make sure that the top of

each panel fits snugly behind the lip of the Top Trim.

Insert the Freezer Panel and Fresh Food Panel.

Carefully push the freezer panel in until it slides

into the slot behind the door handle. Push the filler

panel (required with some door panels) in behind

the decorator panel. Repeat for fresh food panel.

If your model has a dispenser, this step only

applies to the fresh food panel and top freezer panel.

Insert the Bottom Freezer Panel (on dispenser models).

Carefully push the panel in until it slides into the slot

behind the door handle. Push the filler panel (required

with some door panels) in behind the decorator panel.

Cut-Out

Cut-Out

Top Trim Screws

Top

Freezer

Panel

Bottom

Freezer

Panel

Side Trim

Side Trim

Fresh

Food

Panel

Read these instructions completely and carefully.

Consumer S

up

por
t

Troubleshooting T

ips

Operating Instructions

Safety Instructions

Installation

Instructions

Top Trim Screws

Advertising