GE 28 - Manual (Page 24)

Preparing to install the refrigerator.
24
Operating Instructions
Installation Instructions
Safety Information
Troubleshooting T
ips
Customer Service
Leveling Rollers
The rollers have 2 purposes:
The rollers can be adjusted so the refrigerator is firmly positioned on the
floor and does not rock back and forth.
Rollers allow you to move the refrigerator away from the wall for cleaning.
To adjust the rollers, remove the base grille by pulling it out at the bottom.
Turn the two front roller adjusting screws clockwise to raise the refrigerator,
counterclockwise to lower it. Use a 3/8
″
socket wrench, adjustable wrench
or pliers.
Built-In Style models also have rear adjustable rollers so you can align the
refrigerator with your kitchen cabinets. Use a 5/16
″
socket wrench to turn the
screws for the rear rollers— clockwise to raise it, counterclockwise to lower it.
2
1
Read these instructions completely and carefully.
Front Roller
Adjusting Screw Front Roller
Adjusting Screw
Rear Roller Adjusting Screw
(on Built-In Style models only)
Use this screw if the refrigerator
has one. Rear Roller Adjusting Screw
(on Built-In Style models only)
Use this screw if the refrigerator does
not have the screw pictured to the left.