GE 28 - Manual (Page 28)

Inserting the door panels.
28
Operating Instructions
Installation Instructions
Safety Information
Troubleshooting T
ips
Customer Service
Read these instructions completely and carefully.
Loosen the Top Trim on the Freezer and Fresh Food Doors.
Using a T-20 Torx driver, loosen the two screws attaching the Top Trim about
1/4
″
(6 mm).
1
Insert the Top Freezer Panel and Fresh Food Panel.
Lift the Top Trim up 1/4
″
(6 mm) and carefully push the top freezer panel
in until it slides into the slot behind the door handle. Push the filler panel
(required with some door panels) in behind the decorator panel. Repeat
for fresh food panel.
2
Insert the Bottom Freezer Panel.
Carefully push the panel in until it slides into the slot behind the door handle.
Push the filler panel (required with some door panels) in behind the decorator
panel.
3
Tighten the two screws on the Top Trim to 30 in-lbs torque. 4
Cut-out
Cut-out
Top Trim Screws
Top
Freezer
Panel
Bottom
Freezer
Panel
Blue Tape
Liner
Side Trim
Side Trim
Fresh
Food
Panel