Wall mounting, Answering system setup, Voice time/day stamp – GE 25893 User Manual

Page 11: Nswering, Ystem, Etup, Oice, Tamp

Advertising
background image

11

W

ALL

M

OUNTING

NOTE:

For best results, charge the telephone/answering system on a flat

surface before hanging it on the wall.

1. Turn the base over.

2. Attach the wall mounting pedestal by first inserting the tabs on the open

edge of the pedestal into the slots on the lower portion of the bottom of
the base. Then push down and snap the pedestal into place.

3. Slip the mounting holes (on the back of the base and pedestal) over the

wall plate posts and slide the unit down into place. (Wall plate not
included.)

A

NSWERING

S

YSTEM

S

ETUP

This section shows you how to set up your answering system to receive
incoming calls. Before you begin the set up process, you must turn on the
answering system.

• Press the answerer on/off button to turn the answering system on and off.

The MESSAGES indicator lights when the answering system is on. The
indicator blinks when you have messages.

NOTE:

The answering system displays “- -” when it is off.

V

OICE

T

IME

/D

AY

S

TAMP

1. Make sure the answering system is ON.

2. Press and hold the day/check button to set the day of the week.

Advertising