Grizzly G4013 User Manual

Instructions

Advertising
background image

Specifications

Overall Size ...................... 30" L x 21" W x 35" H
Tub Depth ............................................. 10" Deep
Maximum Liquid Level ......10-Gallons or 5" Deep
Minimum Liquid Level ........ 6-Gallons or 3" Deep
Nozzle Diameter ....................................... 5.5mm
Pump Motor .......................110V, 0.7 Amp, 60 Hz
Pump Output .......................................... 50 GPH
Net Weight .................................................57 lbs.

MODEL G4013

20 GALLON PARTS

WASHER

INSTRUCTIONS

Damage to your eyes, lungs, and skin could

result from using this item without proper

protective gear, such as face shield, a respi-

rator, and rubber gloves.

COPyriGHT © AUGUST, 2009 By GrizzLy iNDUSTriAL, iNC.

WARNING: NO PORTION Of THIS MANUAL MAy bE REPRODUCED IN ANy SHAPE

OR fORM WITHOUT THE WRITTEN APPROvAL Of GRIzzLy INDUSTRIAL, INC.

#Cr12088 PriNTeD iN CHiNA

If you need help with your new item, call our Tech
Support at: (570) 546-9663.

Power Supply Circuit Requirements

Only connect this parts washer to a power supply
circuit that is protected with a GFCi (Ground Fault
Circuit interrupt) device.

If you are unsure about

the wiring codes in your area or you plan to

connect your machine to a shared circuit, con-

sult a qualified electrician.

Power Supply Voltage ...........................110 Volts
Minimum Circuit Size ............................. 10 Amps

Inventory (figure 1)

Qty

Work Basket ...................................................... 1
Pump Box .......................................................... 1
Work Shelf ......................................................... 1
Tub ................................................................... 1
Shelf .................................................................. 1
Legs ................................................................... 4
Bolt Bag ............................................................. 1

—Phillips Head Screws M6-1 X 12 (Legs) 25

—Hex Nuts M6-1 (Legs) ........................... 25

—Lock Washers 6mm (Legs) ................... 25

—Phillips Head Screws M4-.7 X 10

(Switch Box) ............................................ 2

—Hex Nuts M4-.7 (Switch Box) .................. 2

—Lock Washers 4mm (Switch Box) ........... 2

figure 1. Assembly diagram.

Shelf

Tub

Legs

Work

Shelf

Pump Box

Work

Basket

Drain

Plug

Advertising