Grizzly G4013 - Manual (Page 3)

Model G4013 20-Gallon Parts Washer
-3-
figure 3 . Typical 5-15 plug and GFCi receptacle.
Grounding Prong is
Longest of the Three
Prongs
Current
Carrying Prongs Grounded
GFCI Outlet
Power Connection Device
This machine comes with a 5-15 style plug. For
improved electrical safety against fire or electrical
shock, only connect this power cord to a GFCi
protected circuit or receptacle (
figure 3).
Selecting a Solvent
This heavy-duty welded steel parts washer has
a 20 gallon work-space volume, but is designed
to hold a maximum of 10
gallons of liquid. Do not
overfill. Not every cleaning solution is safe to use
in your parts washer. NeVer USe GASOLiNe,
KerOSeNe, FUeLS, STriPPerS, Or ACiDS
OF ANy KiND iN THiS PArTS WASHer.
We recommend non-flammable cleaning solutions
with a PH between 6 and 8, but due to the chang-
ing formulas of cleaning solutions and changing
laws and regulations, we cannot name a specific
solution for you.
Some solutions can be highly flammable and may
damage pump and motor seals, and others can
react with what you may be cleaning and produce
harmful fumes.
if you are in doubt about any aspect of your
selected solution, contact the solution manufac-
turer or refer to its Materials Safety Data Sheet
Extension Cords
We do not recommend using extension cords, but
if you find it absolutely necessary:
• Use at least a 16 gauge cord that does not
exceed 50 feet in length!
• The extension cord must have a ground wire
and plug pin.
• A qualified electrician MUST size cords over
50 feet long to prevent pump motor damage.
USE this parts washer with caution and
respect. Always consider safety first, as it
applies to your individual working condi-
tions. No list of safety guidelines can be
complete—every shop environment is dif-
ferent. failure to follow safety guidelines
could result in serious personal injury or
death.
This parts washer is designed to store
cleaning solutions. During storage, some
liquids can grow dangerous microbes, or
due to the collection of toxic metal and
contaminants from the items being washed,
the fluid can become a very poisonous
solution to humans and animals.
USE the correct personal protection
equipment when handling sharp workpieces
to prevent cuts, infections, and poisoning.
fOLLOW OSHA, EPA, and the fluid
manufacturer's requirements to properly
dispose of cleaning liquids when it becomes
time to change the liquid.
bIOLOGICAL and POISON
HAzARD!
Operation
Use the switch to turn on the pump and spray
fluid from the nozzle. Parts may also be dunked or
soaked in the solvent and cleaned with a brush.
(MSDS) information, which often can be found on
the internet also. it is your responsibility to select
a safe solution.
Never run this parts washer if the tank is empty
or if the filter is clogged. if you do, pump damage
will occur.