GE WPRB9250 - Manual (Page 6)

Operating Instructions
Safety Instructions
Consumer Support
Tr
oubleshooting T
ips
You can locate your model number on the bottom right of the washer cabinet.
Quick Start Guide for Model WPRB9250.
Add detergent.
Add diluted fabric softener (on models with
a fabric softener dispenser).
6
Loosely load clothes no higher than the top
row of holes in the washer basket. The water
level should just cover the clothes.
Select one of the three wash methods:
■ Press WASH CYCLES to wash according to
load type .
■ Press GARMENT CYCLES to wash according
to clothing type.
■ Press STAIN CYCLES to wash clothes with
specific types of stains.
The STAIN CYCLES will provide you with
tips on pretreating your stain and will then
automatically select the washer settings for
the optimum cycle to remove the stain.
Select the wash, garment or stain cycle by
pressing the arrow pads (
) at the sides
of the display. You can scroll up and down
through the list of cycles by pressing the
UP (
) and DOWN ( ) arrow pads beneath
the display.
NOTE: Any time you make a selection that is
incompatible with the chosen wash cycle,
the washer will beep twice.
Change any of the automatic settings,
if desired, by pressing the pad beneath
the setting. Higher settings will:
■ Fill the washer basket with more water.
■ Remove heavier soil. The highest level is the
Stain Wash cycle, with a 30 minute soak and
agitation at the beginning of the wash cycle.
■ Add cold, warm or hot water. The Tap Cold
selection may save energy by turning off
the PerfecTemp Plus washer temperature
control and using the household tap cold
water temperature.
■ Spin faster to remove more water for
shorter drying times.
Close the lid and press START.