Gefen EXT-DVIKVM-841DL - Manual (Page 12)

8
8X1 DVI KVM DL SWITCHER REMOTE INSTALLATION
To use the RMT-8IR remote, remove the battery cover on the back of the remote to
reveal the battery compartment. Insert the included battery into the open battery slot.
The positive (+) side should be facing up. Ensure that both DIP (Dual Inline Package)
switches are in the OFF position. Replace the battery cover. The remote ships with 2
batteries. One battery is needed for operation and the other battery is complimentary.
IR Code Dip Switches
Empty Battery Slot