GE Lamps - Manual (Page 3)

Symbols 2 - 3
PAR Lamps 4 - 17
Single Ended Halogen Lamps 18 - 35
Linear Halogen Lamps 36 - 43
Specialist Projector Lamps 44 - 61
Discharge Lamps 62 - 77
Technical Information 78 - 111
Index 112 - 132
GE Lighting World Addresses 133 - 138
Contents
GE LIGHTING - ENTERTAINMENT LIGHTING CATALOGUE 1
Notes
A Hemispherical shield in front of filament masking all direct light
B Operate at or near horizontal
C Protect from moisture. Safety screening techniques recommended
D Replace broken lamp immediately. Inner bulb pressurised and could shatter unexpectedly
E Use safety screen external to lamp
F Operate BDTH
G Operate BD ±30°
H 100V rating available to order
J 120V rating available to order
K Specially designed for searchlight applications
L Twin filament lamp. Lumen figures relate to single and twin filament options
M Tungsten Halogen minimum bulb wall temp 250°C
N 3 or 4 amp HBC fuse necessary
P 5 or 6 amp HBC fuse necessary
Q 6 or 7 amp HBC fuse necessary
R 10 amp HBC fuse necessary
S Due to internal integral reflector nominal lumens not shown
T Obscured top
V Due to integral dichroic reflector nominal lumens not shown
W Axial coiled coil single ended lamps will generally give better reliability against premature
arcing if orientations in which the main support spine is under the filament are avoided
GE S&S 2000 9/03/00 9/3/00 1:08 pm Page 3