GE 68K System - Manual (Page 59)

68K System Monitor
User's Guide
GE Energy Services
General SWM0023-1.00 -2
Full Release 3-33
EL - Error Log
Platform þ CPM þ D20
D20 Base þ D20 ME
D20 Base þ D20/200
CCU Base þ D20/200 ME
CCU Base þ D25
Description Use this command to display and delete system error log entries stored in NVRAM
for a single or multi-processor system.
The display command also presents the current system state, and any significant low-
level system errors which occur.
The delete function deletes system error log entries from memory, and clears the
disabled state if the system is in a disabled state.
Syntax Below is usage and syntax information for this command
Command Format CPM / D20 el / (p | r)
D20ME / CCU / D25 el / (p | r | f)
Variables /p = print the error log entries
/r = reset (delete) the error log entries
/f = fix an error log that contains an infinite loop
Parameters None
Example Type el /p and press ENTER .
Results: This command displays the error log entries
maintained by the system and the system state.
The system returns the prompt when it completes this
instruction
Special
Considerations None